The inner diameter of the high-pressure hose must be appropriate. If the inner diameter is too small, it will increase the flow rate of the medium in the pipeline, heat the system, reduce efficiency, and produce an excessive pressure difference, affecting the performance of the entire system. If the high-pressure hose is fixed with a pipe clamp or the high-pressure hose has to pass through obstacles and other spacers, pay attention to the outer diameter of the high-pressure hose.
Safety factors of high-pressure hoses specified in accordance with international standards. The general recommendation is that the working pressure is one-quarter of the minimum burst pressure of the high-pressure hose.
The quality of high-pressure hoses is also affected by temperature. If the working temperature exceeds the operating range, the life of the high-pressure hose will be affected.
When installing the high-pressure hose assembly, attention should be paid to the minimum bending radius of the high-pressure hose. If the bending radius is too small, it will directly affect the load-bearing capacity of the high-pressure hose and affect its service life.
If the high-pressure hose is used normally, it will often rub or come into contact with hard objects. It is recommended to add a high-pressure hose sheath outside the high-pressure hose. Protect high-pressure hoses.
